Marble, a stone from limestone, is prized because of its smooth and elegant look. Unfortunately, it is also quite delicate and can be easily worn down by regular use.
House and Tech is reader-supported. When you buy through links on our site we may earn an affiliate commission. Learn More.
Water stains are easily noticeable on the beautiful stone’s surface and can’t be removed with regular cleaning methods.
Sometimes that stain can be removed with a mild acid or bleach. But that’s not the best option, especially if marble is used as a countertop. To remove water stains from marble countertop, it is necessary to find out the source of the stain.
Remove Marble Countertop Dark Water Stain
The source for the stain on the marble is usually mineral deposits trapped in the stone. The calcium carbonate of this sediment reacts with chemicals present in water to form lime, which leaves a white or light gray stain. This happens when there is a large amount of calcium in the water and a low phosphate level.
As for removing black stains, use either a commercial stain remover or a mixture of vinegar and 25% hydrogen peroxide. Both are effective even on old water stains. Once the stain is removed, use a clean cloth to polish the surface until it shines again.
You May Also Like: 18 Types of Countertop Materials Cost + Pros Cons
Remove Yellow Water Spots in Marble Countertop with Toothpaste
Yellow water spots can be removed by rubbing the affected area with toothpaste. If the marble is used as a kitchen countertop, lime can be mixed with water and applied to the yellow spot. It will crystallize and make it easier to remove.
Remove Hard Water Stains in Marble Countertop with Baking Soda Poultice
For hard water stains, it is recommended to use baking soda and vinegar. This will remove the stain and also restore the surface of the marble.
A safe and effective marble cleaner can be made at home. Follow these steps to make the cleaner:
- To make this, mix 2 tablespoons of baking soda with 1 cup of lime juice in a bowl.
- Next, apply it to your marble countertop and wait for 2 hours.
- After that, wet your sponge and wipe the rest of the liquid away.
- Then, after 4 to 5 minutes, scrub the surface with a white scouring pad or sponge to make things even smoother.
- To keep your marble counters clean, apply a cleaning solution to the surface and wipe the excess away.
- Then polish with a soft cloth when dry.
Easiest Ways Remove Water Stains from Marble Countertop
How to remove water stains from marble countertop effortlessly?
If you are not satisfied with the results of the above methods and want to get rid of all water stains, then a final solution can be achieved by using a marble cleaner. This can be obtained from any store or online.
The best way to restore the shine of marble countertops is with a good professional stone polish.
How to Prevent Stain in Marble Countertop
To prevent water stains in marble, it is necessary to check the surface condition before and during installation.
It is also important to properly maintain the countertop by regularly wiping it. By keeping a clean countertop, you will prevent the potential formation of water stains.
Many of the above alternatives for water stains on marble countertops have been used to remove stains several times. Some of these techniques can be quite expensive, though.
Marble Countertop Care and Cleaning Tips
When cleaning, avoid using any harsh chemicals. If you want to use an acid-based cleaner, make sure you dilute it a lot. Never rub your marble countertop with the abrasive side of a sponge or dishcloth. It will scratch the surface. Instead, use a soft, dry cloth to clean it.
Also, don’t use any chemical-based cleaners in the kitchen. These chemicals can react with the food you are preparing and give it an unappetizing and unsavory taste.