When you think of welders or welding devices, you automatically look at some of the top construction and automobile factories on the market today. Many people already believe that these industrial-grade welders are not easy to find, but they actually are if you are willing to put in the hours and the research to find the right welders.
- The 5 Best Selling Everlast Welders:
- The 5 Best Everlast Welders:
- 1. Everlast PowerMTS 251Si Pulse MIG TIG Stick 250amp 110v/220v Multi-Process Welder
- 2. Everlast PowerMTS 211Si MIG TIG Stick 200amp 110v-220v Multi Process new Welder
- 3. EVERLAST PowerARC 140 140amp Lift Start TIG / Stick IGBT Welder
- 4. Everlast PowerTIG 185 DV AC/DC TIG Stick Welder
- 5. Everlast Powermig 200 200amp MIG Stick Welder
- Key Features To Consider When Choosing A Welder
The 5 Best Selling Everlast Welders:
- Low 5 amp Start for TIG in AC and DC modes (+/- 2 amps)
- Pre flow and Post flow control for maximum shielding gas protection before and after
- Arc force control for stick reduces spatter and helps improve arc performance in short arc...
- Consumable Starter Kit (Tungsten not included)
- Improved HF start circuit for reduced maintenance issues
- Stable, smooth DC arc
- Digital IGBT inverter
- Low power consumption
- Complete Stick/TIG welding package with carry case
- Adjustable arc force control
- Heavy-Duty IGBT Power Modules increase reliability and performance
- True low amp operation down to 3 amps DC and 5 amp AC
- AC Wave Forms: Advanced Square /Soft Square / Triangular / Sine
- Simplified menu design allows settings to be quickly selected and adjusted
- 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn...
- IGBT INVERTER // CAST ALLOY DRIVER ROLLER // 135A/21V @ 35% Duty Cycle/40º C
- Spool Gun READY / Drive Roll wire size: .023”-.035” // Tweco Style Gun
- Stepless control of both the wire speed and voltage. No tapped settings
- Designed to be used with both 4" and 8" Wire Spools /
- Standard drive rolls can feed .023"-.035" Wire diameter
- Stable, Smooth DC ARC for best Stick/TIG welds. No AC output.
- Dedicated E6010 connection port for best E6010 and cellulose rod performance
- Auto regulated Arc force control for better arc performance in short arc situations
- Digital display for precise current setting
- Auto Adaptive Hot Start for reduced rod sticking during starting
These welders have been thoroughly tested and this is also the reason why we believe you should stick to one of the best brands. Everlast welders are some of the most highly rated options and they offer great versatility for virtually anyone in the industry. If you are looking for a starting point, the brand has a major influence and Everlast is one of the best.
In this article, we take a look at some of the top Everlast welders and some of the features they include to make them stand out. After reading this article, you should have a much better idea of the top welders and which ones will work for you. We also included a buyer’s guide that can not only be used for Everlast welders but basically any welder you can think of.
The 5 Best Everlast Welders:
Before we actually look at the top welder features, you should definitely understand the top welders. We have tested all of these options with some expert help to see if they are worth your time and money, as we understand they can be expensive. With that being said, here is our selection for the top 5 Everlast welders currently available on the market today:
If you are looking for one of the most versatile pieces of equipment on the market today, the Everlast PowerMTS 251Si Pulse MIG TIG Stick 250amp 110v/220v Multi-Process Welder will be one of your best friends. It features MIG, TIG, and STICK at DC, while also giving you the Pulse MIG and Pulse TIG when it comes to the overall versatility needed by many top welders.
One of our favorite aspects is the versatility that you receive when looking at the control that is offered. Users can choose from a touchless start in TIG phase, while also navigating many hotkeys in the STICK phase. The other controls and display pad is fairly easy to understand and to control as well, making this one of the best options for any user.
A TIG foot pedal also adds more to the versatility and helps you to also remain at a safe distance when you are welding. It features up to 9 different programs that have all been designed to help you save a couple of bucks. With one of the fastest connecting MIG guns, you should not need to worry about the welder delaying your process in any real way.
As for the price, it is one of the most expensive welders we have on the market today. However, this will still be worth it at the end of the day as we have not seen any welder with all this functionality and versatility. It might be a little heavy for some users at 80-pounds, but it certainly comes with a good warranty to give you some peace of mind as well.
- Multifunctional and compact
- Decent warranty
- Includes a TIG starting foot pedal
- 9 Energy-saving programs
- Really easy to use display
- Quite heavy
The Everlast PowerMTS 211Si MIG TIG Stick 200amp 110v/220v Multi Process new Welder is a slightly upgraded version of the previous welder, but it still features some great additions that anyone can actually use. This welder is also multifunctional, with the MIG, TIG, and STICK welding included in DC. This is something that the most avid users will probably need.
Much like the previous one, the display is really functional and you don’t need to worry too much about getting lost with the features. With an adjustable ARC form that you can control, the STICK welding performance can be a little more enhanced. You also have the ability to use this welder with a little more accuracy than many of the others.
Once the feeding of the wire stops, many people have some trouble. However, the Burn Back feature will have the wire burn back to ensure the welding is even and much smoother. Figuring out how to correctly make some adjustments when it comes to thickness might be a little daunting for many. However, you should see much better welding once this has been done.
As for the price, these top of the range welders tends to be a little expensive, as you should notice reading some of the others. However, Everlast is one of the top brands and they are backed by industry-leading warranties to give you some peace of mind. If you need something versatile and compact for your factory, this should be an excellent investment.
- Fully adjustable features
- Reasonable price
- Decent warranty
- Offers a smooth and even welding experience
- Newest model
- Figuring out the settings can be a little daunting for many
The EVERLAST PowerARC 140 140amp Lift Start TIG / Stick IGBT Welder is one of the more affordable welders that actually helps you learn more about welding and improve your skills in the craft. This TIG/STICK welder is powered by a 140-amp power source and we actually love this since it is much easier to contain when welding as a beginner.
Compared to some of the other welders, this one contains energy-saving technology and can reduce your energy consumption by up to 35%, as these welders do actually consume a lot of power at full pace. The lift start TIG setting is one of the very best when it comes to welding steel and stainless steel. Combine this with the low arc DC and you have a functional welder.
Most of the top Everlast welders also have a durable carry case. However, this one is one of the cheaper models, which means the carry case is important. It is also lighter and easier to move. Nevertheless, the durable plastic can withstand a few bumps and falls to the ground. Many people have claimed that the TIG arc can take a little time for you to get used to.
Since this is one of the smaller models, it should be no surprise that it is also one of the cheapest models. As we have mentioned, it is designed for the avid beginner and should offer you some excellent value for your money. The same Everlast quality warranty has also been included to give you some peace of mind. We would recommend it for the avid beginner.
- Compact and lightweight
- Durable outer casing
- Includes TIG and STICK welding
- Really affordable
- Decent warranty
- The TIG arc takes some getting used to
Next, we have another state of the art welder with decent power output. The Everlast PowerTIG 185 DV AC/DC TIG Stick Welder is a little more powerful than the previous one with a power output of around 185-amps. However, it also features the TIG/STICK welding in DC to ensure that you can actually use it correctly.
Since the build is similar to the 140-amp models, you will find that it is also quite small and compact to actually move around. It has the same low DC arc that some people will need to spend some time with if they are to master this welder. The setup does not take too much time and you have access to a fully functional device that is really easy to navigate.
Many people believe that TIG welding does require a foot pedal and while we have actually found it to be much more functional to have one, not every welder will have it included. This one does not have the foot pedal included and this has caused some concerns for many users. However, it can be purchased separately but will be a little more expensive.
Once again, Everlast has given their consumers a break when it comes to the price. This is another really affordable model that should be perfect for those who are just starting out. It comes with the same 5-year warranty on the device and the parts and many people believe this warranty shows a lot of confidence from the manufacturer in their product. This will be a great buy this festive season.
- TIG and STICK welding
- Decent power output
- Small, compact, and lightweight
- Reasonably priced
- Includes a 5-year warranty
- Takes time to learn the DC arc
- No foot pedal included
Last but certainly not least, we have the powerful Everlast PowerMIG 200 200amp MIG stick welder. This is one of those welders that you occasionally find at your top welding shops and this is for the powerful 200-amp power output. The advanced inverted design also keeps the weight on the downside, without removing any of the top features that you could need.
This welder is one of the top MIG/STICK welders on the market today and it has one of the easiest display systems that will ensure you can easily use it. The analog knobs might look a little old and be a little weak, but this will still give you functionality. The MIG phase is one of the best features when it comes to deep welding and penetration.
The arc control is one of the easiest to use and we have seen this as one of the best selling points. Yes, the tool might have a sloppy spool, but the fast changeover Eurogun style is another excellent feature that many people can make use of. We would also like to mention that it is portable and most people can actually carry it around with ease.
Now for the price, you might expect something over the top. However, this is not the case and this welder is one of the most comfortable options that you could use. The welder is relatively new to the market and includes the state of the art Everlast warranty that you have come to know so far. This would be one of the top commercial welders from Everlast to choose from.
- Portable and compact inverted design
- MIG and STICK welding
- Reasonably priced
- Decent warranty
- Easy to control arc features
- The spool is a little sloppy
- Adjustment knobs are analog
Key Features To Consider When Choosing A Welder
As you might see, most of these Everlast welders are quite similar, but this should not keep you from actually using them. If these welders are not for you, you can use this buyer guide to help you find a different option. Here are the top features we used to find an excellent welder for commercial and personal purposes:
The Types of Metal You Will Be Welding
The types of metals that you will be welding will play a massive role when it comes to welding. Most welders have a MIG, TIG, and STICK phase and these will all work more effectively for a different type of metal that you choose. TIG is mostly used for some of your tougher metals, while STICK and MIG will work with some of the lesser metals.
Not all three of these phases have been included in all these models, but they will work differently for different metals. Some of the top Everlast welders have all three of these phases included and this will ensure that you get the best value for your money. It might be slightly more expensive, but at the end of the day, it will be worth it when it comes to versatility.
Size and Weight
The size and weight might not seem like one of the most important features, but it definitely does make a massive difference at the end of the day. You need to keep your workplace in mind and the amount of space that you have at your disposal.
The smaller options are also more compact and they offer some more portability if you like traveling. The bigger corporations will look for the most features and more power in their welders. This might lead to some of the heavier and larger options.
Most of these welders are electronically powered and they offer a lot of functionality as well. However, you need to determine how powerful your welder needs to be when looking for the best value for your money.
Anything around the 200-amp range can be really functional and should help you in the commercial world. However, those with less power are excellent for your home welders.
If you ask any avid welder, they will tell you the importance of understanding the materials you are about to weld. The thickness of the material is something you need to understand when looking at the power as well. We have compiled a list of the material thicknesses of some common projects that could also help you:
- Automobile: 3/16-inches
- Cars, Motorcycles, Utility Trailers, and Boats: 1/16 to 1/8-inches
- Fences and Frames of Trailer: 1/4 to 5/16-inches
- Thick Construction Parts: 3/8-inches
- Bicycles: 1/16-inches
- Normal to Heavy Fixing: 3/16 to ¼-inches
It is not that common to have problems when it comes to power tools. However, we actually understand that these tools are some of the most expenses tools that you can have in your arsenal and we have done a lot to ensure we get the best options. Everlast is one of those brands that will go the extra mile for their customers and you see this with the warranties.
Most of these warranties are around 5-years, which mean they are really confident in their products. Additionally, customer service is also one of the very best that we could have asked for. If you are looking for an excellent warranty, consider choosing one of these Everlast welders.
When it comes to the Everlast brand, they have been around for many years and they have built a decent reputation. All of their welders are state of the art and will offer you some great value for your money. However, these are definitely the top 5 options that we could find for you to get real value for your money.
We would like to thank you for reading this article and encourage you to share some of your thoughts on these welders. Let us know in the comment section which one you like and if we might have missed any of your favorite options.
This article was last updated on March 18, 2021 .